Mini On-board Computer / Data-Logger
The DLR-10 is a miniature version of our DL-10 Data-Logger. It analyses the signals received from the counting sensors in real time, then stores the results in memory. It also transfers data from the bus to the office computer.
The microcomputer can record data from up to six sensors. The DLR-10 uses signals from door switches (open/close) as well as the vehicle's transmission and engine (on/off).
The Data-Logger can use existing cabling, requiring new wiring only for the counting sensors in the front and rear doors.
- May be connected to up to 6 sensors.
- Diagnostic lights permit testing major functions.
- A laptop computer or Palm device can be connected to visualize real-time counts.
- Data is available in CSV format, compatible with commonly used software such as Excel, Lotus, and Access.
- The memory can hold 1 to 4 weeks of data, depending on the number of routes driven.
- The Data-Logger's rugged design resists the harsh environmental conditions often found in public transit vehicles.
- A lithium battery maintains the system's time for more than 2 years in case of power loss.
- Data is safely stored permanently in flash memory.
The Data-Logger stores data from counting sensors, then transfers it to the garage computer using the infrared modem, the spread-spectrum modem or the Data-Collector.
Memory: 512 kb - 1024 kb
Sensors: Up to 6 DA-20 can be connected to one DLR-10
Interface: Networkable RS-232 or RS-485
Speed: 600 - 230 400 bps
10 to 20 VDC
Consumption when active: 144 mW, 12 mA
Consumption when idle: 360 mW, 30 MA
(sensors' consumption excluded)
Storage temperature: -40 to 60oC / -40 to 140oF
Operation temperature: -40 to 50oC / -40 to 122oF
Humidity: 10-95% not condensing internally
Type: Printed circuit board
Weight: 50 g / 1,8 oz
Size: 16,3 x 3,9 cm / 6,4 x 1,56 in.
Grey high-impact ABS casing available.
DLR-10 Miniature data acquisition and analysis system
Miniature onboard computer